1.5″ Type F Roof Deck
Type F Roof Deck is 1.5" deep. Also known as intermediate rib, this structural metal roof deck has an intermediate rib profile that allows for more insulation to be installed.
Description
Roof deck products act alone in transferring horizontal and vertical loads into the building frame. Roof Deck does not work compositely with other building materials.
About O’Donnell Metal Deck:
Since 1996 O’Donnell Metal Deck has been fueled by a high performing team you can count on. The order process is seamless from the time you request a metal deck quote, place an order and metal decking is delivered.
Our multiple stock & manufacturing locations combined with years of experience allow O’Donnell Metal Deck to service any job throughout the USA. Our process allows reduces the end-to-end logistic costs for delivering what you need when you need it. Contact your local branch to get started.
WEST
SOUTH CENTRAL
MIDWEST
SOUTHEAST
NORTH
FAQs:
What is 1.5" Type F Roof Deck?
1.5" Type F Roof Deck, often referred to as Type F or Intermediate Rib, is a metal roof deck profile with narrow ribs spaced at 1⅞″. It’s known as a less common, older roof deck profile primarily used today when matching / retrofitting older buildings.
What gauges are available for 1.5" Type F Roof Deck?
We stock 16ga, 18ga, 20ga, and 22ga. coils, The gauge selection affects the deck load capabilities. Confirm your gauge requirements or ask us for recommendations.
What finishes are offered for 1.5" Type F Roof Deck?
Standard available finishes for Type F deck include G-60 galvanized, G-90 galvanized, due to this profiles discontinued use in the market, prime-painted options are limited. Learn more about metal deck finishes here.
What factors influence the cost of 1.5" Type F Roof Deck?
Factors affecting cost include current steel costs, quantity ordered, gauge and finish selection, delivery location and schedule. Be sure to factor in waste allowance. Contact your nearest branch for detailed pricing.
What lead times should I expect for 1.5" Type F Roof Deck?
-
- Stock lengths are generally available same-day or next-day for pickup or delivery.
- Custom-cut lengths in standard gauges (22–16) and finishes (G-60, G-90 or PTD) typically require 1–2 weeks.
- Specialty products like acoustical deck or unique coatings (G-90 + PTD, SS316, etc.) may require third-party coil coating, perforating, or mill order, and could take up to 12 weeks or more. Plan ahead.
Can you custom-cut 1.5" Type F Roof Deck to the length I need?
Yes. We regularly custom-cut deck to specific lengths to reduce waste and speed up installation.
How can I save money when buying 1.5" Type F Roof Deck?
To reduce cost, provide extra lead time, have the EOR specify standard gauges and finishes, stay flexible on final specs, and ask about available surplus or secondary material.
Do you carry surplus or "secondary" 1.5" Type F Roof Deck at reduced prices?
Yes, we often have discounted surplus or secondary material with minor imperfections. Contact us to check current inventory.
F Deck Gauges:
F Deck Finishes:
Galvanized G-60 zinc coated steel is the standard in the deck industry.
Galvanized G-90 is typically specified for exterior applications or project specific needs.
PTD or primer painted is an impermanent, provisional coating and is gray on top and bottom.
Deck Options:
Hanger Tabs:
Hanger tabs are designed for the support of ceilings and you should consult your engineer for individual allowable loads on single hanger tabs.
Fast Metal Deck Shop Drawings:
Our ability to provide fast steel deck approvals has made us one of the best metal deck supply and detailing companies in the United States. Our process begins with fast and direct communication with our customers and stakeholders to ensure maximum productivity and timeliness. The metal deck shop drawing process is as outlined below.
Approval Drawings
Our team gathers, reviews and interprets information from the contract bid documents.
EOR Review
Our steel deck layout is submitted to the design team for missing information or discrepancies to solve potential issues.
BOM Fabrication
Once approved by the engineer, our detailers submit their bills of material to be fabricated.
Field Use Plans
We'll issue easy to read structural steel erection plans for field use to save installation time.
Learn More about Metal Deck Shop Drawings.
Certifications
SDI Members:
We only supply products certified by SDI members that meet the the strict standards for engineering, design, manufacturing and usage of steel decks.
Made in America:
Our products are made with US made steel. When mill certificates are required, we can provide you the material's physical and chemical properties. Contact Us for more information.
UL Classified:
SDI Recommeneded Spans:
Contact us for specific product submittals and load tables
Recommended Maximum Spans for Construction and Maintenance Loads Standard | ||||||
---|---|---|---|---|---|---|
Type | Span Conditon | Span | Max. Recommended Spans Roof Deck Cantilever | |||
Ft.-In. | Meters | Ft.-In. | Meters | |||
F DECK | 22ga. | 1 | 4'-6" | 1.35 m | 1'-2" | .35 m |
22ga. | 2 or more | 5'-6" | 1.65 m | |||
20ga. | 1 | 5'-3" | 1.60 m | 1'-5" | .40 m | |
20ga. | 2 or more | 6'-3" | 1.90 m |
Construction and maintenance loads:
SPANS are governed by a maximum stress of 26 ksi (180 MPa) and a maximum deflection of L/240 with a 200-pound (0.89 kN) concentrated load at midspan on a 1'-0" (300mm) wide section of deck. If the designer contemplates loads of greater magnitude, spans shall be decreased or the thickness of the steel deck increased as required. All loads shall be distributed by appropriate means to prevent damage to the completed assembly during construction.
F Deck Attachment Pattern:
Your project Engineer will determine your attachment requirements for your design loads, building code and project requirements. The following standard 1.5 F Deck attachment pattern has been provided as a minimum recommendation for the product specified. The attachments should be made to from deck to support, deck sidelap to deck sidelap and seck to perimeter supports.
SPECIFICATIONS | DETAIL |
---|---|
Gauges | 16, 18, 20, 22 |
Height | 1.5" |
Comparable Names | Type F, Intermediate Rib, IR, 1.5F |
Width | 36" |
Finish | Prime Painted, Galvanized G-60, Galvanized G-90 |